Preventing Blockages During Air Conveying Of Waste Trim

下载  

Problem

Strips of trim from coffee filter production were clogging the air separator at the bailer due to static charges.

Solution

Meech 261 Bulkhead nozzles were mounted on the two ducts leading to the air separator. Eight nozzles mounted in each 250mm diameter pipe proved very successful; allowing the air separator to run continuously without clogging. 

Given the elevated position of the installation, the 261 Bulkhead nozzles were chosen in preference to a 913 FlowTube. This minimises the requirement to access the equipment for cleaning as far as possible.

  • 类似产品
类似产品
913管型静电消除器

产品代码: 913

密其913 管型静电消除器的设计，旨在中和处理系统与输送系统物料上的静电电荷。

查看

Preventing Blockages During Air Conveying Of Waste Trim

 

Problem

Strips of trim from coffee filter production were clogging the air separator at the bailer due to static charges.

Solution

Meech 261 Bulkhead nozzles were mounted on the two ducts leading to the air separator. Eight nozzles mounted in each 250mm diameter pipe proved very successful; allowing the air separator to run continuously without clogging. 

Given the elevated position of the installation, the 261 Bulkhead nozzles were chosen in preference to a 913 FlowTube. This minimises the requirement to access the equipment for cleaning as far as possible.